PEEL REEFING

To add the reefing system to existing Peels, the cross bridles must be
separated into two groups on each side, one set from each alternate
primary bridle starting from the wing tip set, the others for the
remainder.  This will require some cutting and re-tying.  A loop is made at
the confluence of the wing tip set of cross bridles on each side and to
this a 1.5m line is attached, to the other end of which the flying lines
are attached and from which point 1.25m of "stretchy" returns through
the loop to the remaining cross bridle set on that side.  Confused?  I am; 
then have a look at an existing reefing Peel.